CANOGA PERKINS CanogaOS Command Reference - Manual (Page 415)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 415 of 855
21.10 ip igmp query-max-response-time
Use this command to set the igmp query max response time.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp query-max-response-time <1-25>
no ip igmp query-max-response-time
<1-25>: the igmp query max response time
Defaults
10 seconds
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to set the igmp query max response time to 20 seconds.
Switch(config-if)# ip igmp query-max-response-time 20
This example shows how to return the igmp query max response time to default value.
Switch(config-if)# no ip igmp query-max-response-time
Related Commands
ip igmp querier-timeout
ip igmp query-interval
21.11 ip igmp robustness-variable
Use this command to set the igmp querier robustness variable value.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp robustness-variable <2-7>
no ip igmp robustness-variable
<2-7>: the igmp querier robustness variable value
Command Mode
Interface configuration
Defaults