CANOGA PERKINS CanogaOS Command Reference - Manual (Page 650)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 650 of 855
Switch(config-pmap)#no class cm1
Related Commands
None
32.36 trust
Use this command to set trust value for the class
Command Syntax
(no)trust (dscp|cos|ip-prec|port|outer)
trust: set trust value for the class
dscp: trust dscp value in classified packets
cos: trust cos value in classified packets
ip-prec: trust ip precedence in classified packets
port: trust port default cos value in classified packets
outer: trust the outer header of tunnel to map to priority in classified packets
Command Mode
Config-pmap-c mode
Usage
This command is used to set trust value for the class.
Examples
Switch(config)#policy-map pm1
Switch(config-pmap)#class cm1
Switch(config-pmap-c)#trust cos
Related Commands
None
32.37 set priority color
Use this command to set priority and color of traffic matching this class-map.
Command Syntax
(no)set priority <0-63> color (red|yellow|green)
priority: Specify the priority for matching class-map
color: Specify the color for matching class-map
Command Mode