CANOGA PERKINS CanogaOS Command Reference - Manual (Page 843)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 843 of 855
44.19 show snmp-server group
To display the names of configured SNMP groups, the security model being used, the status of the
different views, and the storage type of each group, use the show snmp-server group command in
privileged EXEC mode.
Command Syntax
show snmp-server group
Command Mode
Privileged EXEC
Usage
SNMP groups are configured using the snmp-server group command.
Examples
The following is sample output from the show snmp-server group command:
Switch# show snmp-server group
Group-name model Security-name
===========================================================
a11 usm a
a11 usm ab
Related Commands
44.20 show snmp-server notify
To display notification information of SNMP, use the show snmp-server notify command in privileged
EXEC mode.
Command Syntax
show snmp-server notify
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show snmp-server notify command: