CANOGA PERKINS CanogaOS Command Reference - Manual (Page 670)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 670 of 855
To create the MAC ACL, please refer to the command mac access-list.
Examples
This example shows how to apply the MAC ACL list_mac_1 on the interface and set the filter for the
outgoing packets.
Switch(config-if)# mac access-group mac_list_1 out
This example shows how to apply the MAC ACL list_mac_2 on the interface and set the filter for the
incoming packets.
Switch(config-if)# mac access-group mac_list_2 in
This example shows how to cancel the application of MAC ACL list_mac_1 on the interface.
Switch(config-if)# no mac access-group mac_list_1 out
Related Commands
mac access-list
33.13 show access-list mac
Use this command to show the MAC ACL information.
Command Syntax
show access-list mac
Command Mode
Privileged EXEC
Usage
None
Examples
This example shows how to show the MAC ACL information.
Switch# show access-list mac
mac access-list list_mac_1
10 deny src-mac host 0000.0001.0002
20 permit src-mac any
Related Commands
mac access-list
33.14 clear access-list counters
Use this command to clear access-list counters.