CANOGA PERKINS CanogaOS Command Reference - Manual (Page 121)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 121 of 855
Usage
None
Examples
This example shows how to display the brief information on vlan:
Switch# show vlan brief
Related Commands
show vlan vlan
6.8 show interface switchport
Use this command to show the vlan configurations on all bridge ports or a bridge port.
Command Syntax
show interface switchport {interface IFNAME|}
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the vlan configurations on all bridge ports or a bridge port:
Switch# show interface switchport interface eth-0-1
Related Commands
switchport mode access
switchport mode trunk
6.9 vlan classifier activate
Use this command to apply vlan classifier group to an interface.
To remove it, use the no form of this command.
Command Syntax
vlan classifier activate group-id based {ip|mac|protocol}
no vlan classifier activate