CANOGA PERKINS CanogaOS Command Reference - Manual (Page 823)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 823 of 855
show dhcp-server
42.12 show dhcp relay information config
To display the DHCP relay information configurations, use the show dhcp relay information config
command in privileged EXEC mode.
Command Syntax
show dhcp relay information config
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show dhcp relay information config command:
Switch# show dhcp relay information config
DHCP relay agent information configuration:
============================================================
no dhcp relay information option
dhcp relay information check
dhcp relay information policy keep
Related Commands
dhcp relay information option
42.13 show dhcp relay information trusted-sources
To display all interfaces configured to be a trusted source for the Dynamic Host Configuration Protocol
(DHCP) relay information option, use the show dhcp relay information trusted-sources command in
privileged EXEC mode.
Command Syntax
show dhcp relay information trusted-sources
Command Mode
Privileged EXEC