CANOGA PERKINS CanogaOS Command Reference - Manual (Page 763)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 763 of 855
Global configuration
Default
No value is defined for NTP keys.
Usage
Use this command to create a value for a NTP key.
Examples
In the following example, the value 321 is given to the NTP key 123:
Switch(config)# ntp key 123 321
Related Commands
show ntp
40.29 ntp interface reload
To reload the NTP configuration on the interfaces, use the ntp interface reload command in global
configuration mode.
Command Syntax
ntp interface reload
Command Mode
Global configuration
Usage
Use this command to reload the NTP configuration on all the interfaces.
Examples
The following example reloads the NTP configuration on all interfaces:
Switch(config)# ntp interface reload
Related Commands
show ntp
40.30 ntp peer
To configure the software clock to synchronize a peer or to be synchronized by a peer, use the ntp
peer command in global configuration mode. To disable this capability, use the no form of this
command.