CANOGA PERKINS CanogaOS Command Reference - Manual (Page 735)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 735 of 855
tftp://address/destination-name}
startup-config Save current configuration to starup-config file, which the switch will use
when system starts up.
destination-name Save current configuration to a specified file.
ftp://address/ Save current configuration to a specified ftp server.
tftp://address/ Save current configuration to a specified tftp server.
Command Mode
Privileged EXEC
Usage
The exact format of the source and destination URLs varies according to the file or directory location.
You may enter a particular file or a filename that follows the standard file system syntax
(filesystem:[/filepath][/filename]).
Examples
The following shows an example to save current configuration to starup-config file:
Switch# copy running-config startup-config
Related Commands
copy
copy startup-config
39.14 copy startup-config
To copy the startup configuration to a specified destination, use the copy startup-config command in
Privileged EXEC mode.
Command Syntax
copy startup-config {destination-name | ftp://address/destination-name |
tftp://address/destination-name}
destination-name Save starup configuration to a specified file.
ftp://address/
Save startup configuration to a specified ftp server.
tftp://address/ Save startup configuration to a specified tftp server.
Command Mode
Privileged EXEC
Usage
The exact format of the source and destination URLs varies according to the file or directory location.
You may enter a particular file or a filename that follows the standard file system syntax
(filesystem:[/filepath][/filename]).