CANOGA PERKINS CanogaOS Command Reference - Manual (Page 299)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 299 of 855
16.33 clear ip bgp vrf
Use this command to reset the specified VPN Routing /Forwarding Instance for BGP connections.
Command Syntax
clear ip bgp (A.B.C.D)|*) vrf WORD (out|in|SOFT)
WORD Specifies the name of the VRF
A.B.C.D Specifies the IPv4 address of the BGP route to be cleared
* Clears all peers
in Performs soft reconfiguration in
out Performs soft reconfiguration out
SOFT = soft in|soft out|soft
soft in Performs soft reconfiguration in
soft out Performs soft reconfiguration out
soft Performs soft reconfiguration in and out
Command Mode
Privileged Exec mode
Usage
If the neighbor address is specified with this command it clears the specified connection. If no address is
specified this command clears all the BGP routes.
Example
Switch# clear ip bgp 3.3.3.3 vrf VRF1 soft in
16.34 debug bgp
Use this command to enable all BGP troubleshooting functions.
Use the no parameter with this command to disable this function.
Command Syntax
debug bgp (all|dampening|events|filters|fsm|keepalives|mpls|nsm|UPDATES)
no debug all bgp
no debug bgp (all|dampening|events|filters|fsm|keepalives|mpls|nsm|UPDATES)
all Used with the no form exclusively; turns off all debugging for BGP
dampening Specifies debugging for BGP dampening.
events Specifies debugging for BGP events.
filters Specifies debugging for BGP filters.
fsm Specifies debugging for BGP Finite State Machine (FSM).
mpls Specifies debuggin for BGP Multiprotocol Label Switching.