CANOGA PERKINS CanogaOS Command Reference - Manual (Page 610)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 610 of 855
30.16 show mpls vpls
Use this command to display MPLS VPLS instance information.
Comm a nd Syntax
show mpls vpls [NAME | detail | mesh]
Syntax description
NAME Identifying string for VPLS.
detail Show detailed VPLS information.
mesh Show MPLS VPLS Mesh Forwarding information.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls vpls command is used to display MPLS VPLS instance
information:
Switch# show mpls vpls
Name VPLS-ID MPeers(R) MPeers(T) SPeers State
vpls2 720 0 0 0 Inactive
vpls1 7000 1 0 0 Active
In the following example, the show mpls vpls detail command is used to display detailed VPLS
information:
Switch# show mpls vpls detail
Virtual Private LAN Service Instance: vpls2, ID: 720
Group ID: 0, Configured MTU: NULL
Description: none
AC interface :
Name TYPE Vlan
eth-0-6 Ethernet ALL
Virtual Private LAN Service Instance: vpls1, ID: 7000
Group ID: 0, Configured MTU: NULL
Description: none
AC interface :
Name TYPE Vlan
eth-0-5 Ethernet ALL
Mesh Peers :
Peer PW Type State
202.198.25.2 RAW UP
In the following example, the show mpls vpls mesh command is used to display MPLS VPLS
Mesh Forwarding information: