CANOGA PERKINS CanogaOS Command Reference - Manual (Page 834)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 834 of 855
group-name Name of the group.
user user-name Name of the user in that group.
Default
No SNMP server groups are configured.
Command Mode
Global configuration
Usage
The SNMP engine ID is a unique string used to identify the device for administration purposes. You do
not need to specify an engine ID for the device. For further details on the SNMP engine ID, see RFC
2571.
Examples
The following is sample output from the snmp-server group command:
Switch(config)# snmp-server group SampleA user User1 security-model usm
Related Commands
show snmp-server group
44.7 snmp-server notify
To set the notification of traps for Simple Network Management Protocol (SNMP), use the
snmp-server notify command in global configuration mode. To restore to the default value, use the no
form of this command.
Command Syntax
snmp-server notify notify-name tag tag-name [inform trap]
no snmp-server notify notify-name
notify-name Name of the notification.
tag tag-name Name of the tag.
Default
No SNMP notify names are configured.
Command Mode
Global configuration
Usage