CANOGA PERKINS CanogaOS Command Reference - Manual (Page 275)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 275 of 855
Designated Router (ID) 10.0.0.1, Interface Address 3.3.3.1
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
Hello due in 00:00:17
Neighbor Count is 1, Adjacent neighbor count is 0
Crypt Sequence Number is 1218176990
Hello received 0 sent 80, DD received 0 sent 0
LS-Req received 0 sent 0, LS-Upd received 0 sent 0
LS-Ack received 0 sent 0, Discarded 0
Related Commands
15.39 show ip ospf neighbor
To display Open Shortest Path First (OSPF)-neighbor information on a per-interface basis, use the
show ip ospf neighbor command in privileged EXEC mode.
Command Syntax
show ip ospf neighbor [interface-name] [neighbor-id] [detail]
interface-name (Optional) Interface name.
neighbor-id (Optional) Neighbor ID.
detail (Optional) Displays all neighbors given in detail (lists all neighbors).
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show ip ospf neighbor command showing a single line of
summary information for each neighbor:
Switch# show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
10.199.199.137 1 FULL/DR 0:00:31 192.168.80.37 eth-0-1
172.16.48.1 1 FULL/DROTHER 0:00:33 172.16.48.1 vlan1
172.16.48.200 1 FULL/DROTHER 0:00:33 172.16.48.200 vlan2
10.199.199.137 5 FULL/DR 0:00:33 172.16.48.189 eth-0-2
Related Commands