CANOGA PERKINS CanogaOS Command Reference - Manual (Page 594)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 594 of 855
29.8 show mpls vc-table
Use this command to display MPLS Virtual Circuit table.
Comm a nd Syntax
show mpls vc-table
Syntax description
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls vc-table command is used to display MPLS Virtual
Circuit table:
Switch# show mpls vc-table
VC-ID PW Intf AC Intf L/R Label EndPoint Status Manual
100 eth-0-9 eth-0-1 1024/1024 202.198.25.2 Active No
500 eth-0-9 eth-0-3 210/220 202.198.25.2 Active Yes
600 eth-0-9 eth-0-4 1025/1025 202.198.25.2 Active No
Related Commands
show mpls l2-circuit