CANOGA PERKINS CanogaOS Command Reference - Manual (Page 68)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 68 of 855
To remove the management ip address, use the no form of this command.
Command Syntax
management ip address {A.B.C.D/M |A.B.C.D mask}
no management ip address
A.B.C.D/M: the management ip address with mask length you configured
A.B.C.D mask: the management ip address and mask you configured
Command Mode
Global configuration
Usage
The management ip address configured here will not be routed.
Examples
The following example sets the management ip address.
Switch(config)# management ip address 192.168.100.100/24
The following example unsets the management ip address.
Switch(config)# no management ip address
Related Commands
Show management ip address
4.15 shutdown
Use the shutdown interface configuration command to disable an interface. Use the no form of this
command to restart a disabled interface.
Command Syntax
shutdown
no shutdown
Command Mode
Interface configuration
Usage
None
Examples
The following example shows how to disable a port.
Switch(config-if)# shutdown