CANOGA PERKINS CanogaOS Command Reference - Manual (Page 544)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 544 of 855
27.7 neighbor as-origination-interval
Use this command to adjust the interval of sending AS origination routing updates.
Use the no parameter with this command to disable this feature.
Command Syntax
neighbor NEIGHBORADDRESS as-origination-interval TIME
(no) neighbor NEIGHBORADDRESS as-origination-interval
NEIGHBORADDRESS neighbor IP address. Use A.B.C.D form.
TIME <1-600> time in seconds
Default
Disabled
Command Mode
Router mode and Address Family mode
Usage
This command is used to change the minimum interval between sending AS-origination routing updates. The
interval can be from 1 to 600 seconds.
Examples
Switch(config-router)# address-family ipv4 vrf VRF_A
Switch(config-router-af)# neighbor 10.10.0.1 as-origination-interval 10
Related Commands
address-family ipv4 vrf
27.8 neighbor as-override
Use this command to configure a PE router to override the Autonomous System Number (ASN) of a site with
the ASN of a provider.
Use the no parameter with this command to remove VPN IPv4 prefixes from a specified router.
Command Syntax
(no) neighbor NEIGHBORADDRESS as-override
NEIGHBORADDRESS neighbor IP address. Use A.B.C.D form.
Default
Disabled