CANOGA PERKINS CanogaOS Command Reference - Manual (Page 644)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 644 of 855
qb2: queue 2 bandwidth percent range
qb3: queue 3 bandwidth percent range
qb4: queue 4 bandwidth percent range
qb5: queue 5 bandwidth percent range
qb6: queue 6 bandwidth percent range
qb7: queue 7 bandwidth percent range
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure the queue bandwidth percent range to 10% per queue.
Switch(config-if)#queue-bandwidth 10 10 10 10 10 10 10 10
This example shows how to return the queue bandwidth to default value.
Switch(config-if)#no queue-bandwidth
Related Commands
None
32.27 qos statistics queue
Use this command enable the queue statistics.
To disable it, use the no form of this command.
Command Syntax
qos statistics queue
no qos statistics queue
Command Mode
Global configuration
Usage
None
Examples
This example shows how to enable the queue statistics.
Switch(config)# qos statistics queue
This example shows how to disable the queue statistics.
Switch(config)# no qos statistics queue
Related Commands