CANOGA PERKINS CanogaOS Command Reference - Manual (Page 73)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 73 of 855
show interface status
4.21 show interface status
Use this command to display the brief information on all ethernet and LAG interfaces.
Command Syntax
show interface {IFNAME|}
IFNAME: the name of interface.
Command Mode
EXEC
Usage
This command will not show vlan and tunnel interfaces’ information.
Examples
This example shows how to display the brief information on all ethernet and LAG interfaces.
Switch# show interface status
Port Status Duplex Speed Mode Type Description
-----------------------------------------------------------------------------
eth-0-1 down a-full a-1000 ACCESS 1000BASE_T
eth-0-2 down a-full a-1000 ACCESS 1000BASE_T
eth-0-3 admin down auto auto ACCESS 1000BASE_T
eth-0-4 admin down auto auto ACCESS 1000BASE_T
eth-0-5 up a-full a-1000 routed 1000BASE_T
eth-0-6 up a-full a-100 ACCESS 1000BASE_T
eth-0-7 admin down auto auto ACCESS 1000BASE_T
eth-0-8 admin down auto auto ACCESS 1000BASE_T
eth-0-9 down a-full a-1000 ACCESS 1000BASE_T
eth-0-10 down a-full a-1000 ACCESS 1000BASE_T
eth-0-11 admin down auto auto ACCESS 1000BASE_T
eth-0-12 admin down auto auto ACCESS 1000BASE_T
eth-0-13 admin down auto auto ACCESS 1000BASE_T
eth-0-14 admin down auto auto ACCESS 1000BASE_T
eth-0-15 admin down auto auto ACCESS 1000BASE_T