CANOGA PERKINS CanogaOS Command Reference - Manual (Page 271)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 271 of 855
area range
15.35 show ip ospf
To display general information about Open Shortest Path First (OSPF) routing processes, use the
show ip ospf command in user EXEC or privileged EXEC mode.
Command Syntax
show ip ospf [process-id]
Command Mode
User EXEC
Privileged EXEC
Usage
Examples
The following is sample output from the show ip ospf command when entered without a specific
OSPF process ID:
Switch# show ip ospf
Routing Process "ospf 0" with ID 10.0.0.1
Process uptime is 3 days 0 hour 20 minutes
Process bound to VRF default
Conforms to RFC2328, and RFC1583 Compatibility flag is disabled
Supports only single TOS(TOS0) routes
This router is an ASBR (injecting external routing information)
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Refresh timer 10 secs
Number of incomming current DD exchange neighbors 0/5
Number of outgoing current DD exchange neighbors 0/5
Number of external LSA 0. Checksum 0x000000
Number of opaque AS LSA 0. Checksum 0x000000
Number of non-default external LSA 0
External LSA database is unlimited.
Number of LSA originated 10
Number of LSA received 0
Number of areas attached to this router: 4
Area 0 (BACKBONE) (Inactive)
Number of interfaces in this area is 0(0)
Number of fully adjacent neighbors in this area is 0
Area has no authentication