CANOGA PERKINS CanogaOS Command Reference - Manual (Page 342)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 342 of 855
Command Syntax
show ip bgp view WORD neighbors
show ip bgp view WORD neighbors (A.B.C.D|X:X::X:X)
WORD the name of the instance to display data for.
A.B.C.D|X:X::X:X The IPv4 and IPv6 address of the neighbor
Command Mode
Privileged Exec mode and Exec mode
Examples
Switch# show ip bgp view I2 neighbors
BGP neighbor is 10.10.10.52, remote AS 10, local AS 10, internal link
BGP version 4, remote router ID 10.10.10.52
BGP state = Established, up for 00:03:22
Last read 00:00:13, hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
Route refresh: advertised
Address family IPv4 Unicast: advertised
Received 8 messages, 0 notifications, 0 in queue
Sent 8 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
Community attribute sent to this neighbor (both)
5 accepted prefixes
0 announced prefixes
Connections established 1; dropped 0
Local host: 10.10.10.50, Local port: 179
Foreign host: 10.10.10.52, Foreign port: 36950
Nexthop: 10.10.10.50
Nexthop global: fe80::280:c8ff:feb9:d268
Nexthop local: ::
BGP connection: non shared network
Read thread: on Write thread: off
Related Commands
show ip bgp neighbors
16.97 show ip bgp view summary
Use this command to view the summary data of neighbors of the given instance.