CANOGA PERKINS CanogaOS Command Reference - Manual (Page 447)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 447 of 855
ip pim register-source
24.15 ip pim rp-address
Use this command to set the pim rp (rendezvous point) address.
To remove it, use the no form of this command.
Command Syntax
ip pim rp-address address [ [ access-list ] override ]
no ip pim rp-address
address: the rp address
access-list: the name of an access-list
override: Overrides dynamically learned RP mappings
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the pim rp address to 1.1.1.1.
Switch(config)#ip pim rp-address 1.1.1.1
This example shows how to remove the rp address 1.1.1.1.
Switch(config)#no ip pim rp-address 1.1.1.1
Related Commands
ip pim rp-candidate
ip pim rp-register-kat
24.16 ip pim rp-candidate
Use this command to set the candidate rp.
To remove the candidate rp, use the no from of this command.
Command Syntax
ip pim rp-candidate interface [interval ] [priority ] [group-list access-list]
no ip pim rp-candidate
interface: the name of the interface to be the candidate rp
interval :<1-16383> C-RP advertisement interval in seconds
priority : <0-255> Candidate-RP priority