CANOGA PERKINS CanogaOS Command Reference - Manual (Page 419)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 419 of 855
show ip igmp interface [interface]
interface : the name of the interface to display
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the information about igmp on interface eth-0-1.
Switch# show ip igmp interface eth-0-1
Related Commands
show ip igmp groups
21.17 show ip mroute
Use this command to display the ip multicast routing table.
Command Syntax
show ip mroute [ip_address |count |route-limit |sparse |summary]
ip_address: source or group ip address
count: route and packet count data
route-limit: max route limit value
sparse: show sparse multicast routes
summary: provide abbreviated display
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the route and packet count data.
Switch#show ip mroute count
IP Multicast Statistics
Total 0 routes using 0 bytes memory
Route limit/Route threshold: 1024/1024
Total NOCACHE/WRONGVIF/WHOLEPKT recv from fwd: 0/0/0
Total NOCACHE/WRONGVIF/WHOLEPKT sent to clients: 0/0/0
Immediate/Timed stat updates sent to clients: 0/0