CANOGA PERKINS CanogaOS Command Reference - Manual (Page 776)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 776 of 855
udp 0 0 localhost:ntp *:*
udp 0 0 *:ntp *:*
udp 0 0 ::1:ntp *:*
udp 0 0 *:ntp *:*
raw 0 0 *:2 *:* 7
raw 0 0 *:89 *:* 7
raw 0 0 *:103 *:* 7
raw 0 0 *:58 *:* 7
Related Commands
show network connections
show network statistics
40.43 show network connections
To display the network connections in your switch, use the show network connections command in
privileged EXEC mode.
Command Syntax
show network connections {all | ipv4 | ipv6} {all | raw | tcp | udp} [numeric]
all Display IPv4 and IPv6 network services.
ipv4 Display IPv4 network services.
ipv6 Display IPv6 network services.
all Display RAW, TCP, and UDP information.
raw Display RAW information.
tcp Display TCP information.
udp Display UDP information.
numeric (Optional) Show numerical host addresses and port numbers.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show network connections command:
Switch# show network connections all all
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 1.1.2.3:telnet 1.1.2.2:55369 ESTABLISHED
tcp 0 0 1.1.2.3:telnet 1.1.2.2:59851 ESTABLISHED