CANOGA PERKINS CanogaOS Command Reference - Manual (Page 361)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 361 of 855
18.9.1.2 Syntax Description
Objected Object identity is used to identify track object, its range is
from 1 to 500;
18.9.1.3 Command Mode
Global configuration
18.9.1.4 Defaults
none
18.9.1.5 Examples
In the following example, the track interface linkstate command is used to create an track
object:
Switch(config)#track 1 interface eth-0-1 linkstate
Switch(config-track)#
18.9.1.6 Related Commands
Show track
18.10 TRACK RTR REACHABILITY
Create a track object and track the state of an ip sla entry, use the track rtr reachability to
command in global configuration mode. To remove a track, use the no form of this command.
When the state of ip sla entry is OK or Overthreshold, track object state is up; otherwise track
object state is down.
18.10.1.1 Command Syntax
track objected rtr entrynumber reachability
no track objectid
18.10.1.2 Syntax Description
objectid Object identity is used to identify track object, its range is
from 1 to 500;
entrynumber Entry number is used to identify ip sla monitor entry, its
range is from 1 to 500;
18.10.1.3 Command Mode
Global configuration