CANOGA PERKINS CanogaOS Command Reference - Manual (Page 446)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 446 of 855
Usage
None
Examples
This example shows how to enable rp reachability check for pim registers.
Switch(config)#ip pim register-rp-reachability
This example shows how to disable rp reachability check for pim registers.
Switch(config)#no ip pim register-rp-reachability
Related Commands
ip pim register-rate-limit
ip pim register-source
ip pim register-suppression
24.14 ip pim register-suppression
Use this command to set the register suppression time.
To return this time to default value, use the no form of this command.
Command Syntax
ip pim register-suppression <1-65535>
no ip pim register-suppression
<1-65535>: register suppression time in seconds
Defaults
60s
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the register suppression time to 100s.
Switch(config)#ip pim register-suppression 100
This example shows how to return the register suppression time to default value.
Switch(config)#no ip pim register-suppression
Related Commands
ip pim register-rate-limit
ip pim register-rp-reachability