CANOGA PERKINS CanogaOS Command Reference - Manual (Page 423)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 423 of 855
Global configuration
Usage
This command will overwrite the configuration of immediate-leave.
Examples
This example shows how to enable igmp snooping fast-leave.
Switch(config)#ip igmp snooping fast-leave
This example shows how to disable igmp snooping fast-leave.
Switch(config)#no ip igmp snooping fast-leave
Related Commands
ip igmp snooping
22.3 ip igmp snooping last-member-query-interval
Use this command to set the last member query interval of igmp snooping.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp snooping last-member-query-interval <1000-25500>
no ip igmp snooping last-member-query-interval
<1000-25500>: the last member query interval (ms)
Defaults
1000 ms
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the last member query interval.
Switch(config)# ip igmp snooping last-member-query-interval 2000
This example shows how to return the last member query interval to default value.
Switch(config)# no ip igmp snooping last-member-query-interval
Related Commands
ip igmp snooping