CANOGA PERKINS CanogaOS Command Reference - Manual (Page 793)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 793 of 855
{5 | notice} Normal but significant conditions.
{6 | information} Informational messages.
{7 | debug} Debugging messages.
Command Mode
Global configuration
Default
Logging file level is {4 | warning}
Usage
Specifying a severity-level causes messages only at that level and numerically lower levels to files.
Examples
In the following example, the user specifies that only messages of the levels error, critical, alerts, and
emergency be logged to files:
Switch(config)# logging level file 3
Related Commands
logging level module
40.66 logging level module
To set severity level, use the logging level module command in global configuration mode. To return
the logging to the default level, use the no form of this command.
Command Syntax
logging level module {alert | critical | debug | emergency | error | information | notice | warning |
severity-level}
no logging level module
{0 | emergency} System is unusable.
{1 | alert} Immediate action needed.
{2 | critical} Critical conditions.
{3 | error} Error conditions.
{4 | warning} Warning conditions.
{5 | notice} Normal but significant conditions.
{6 | information} Informational messages.
{7 | debug} Debugging messages.
Command Mode
Global configuration