CANOGA PERKINS CanogaOS Command Reference - Manual (Page 163)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 163 of 855
Default
Usage
Examples
The following is an output of this command displaying the mstp information of an interface.
Switch# show spanning-tree mst interface eth-0-1
Bridge up - Spanning Tree Enabled
Mode - Multiple spanning tree protocol
Path Cost Standard - dot1t
CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
Tx Hold Count 6
CIST Root Id 8000be8c722f7f00
CIST Reg Root Id 8000be8c722f7f00
CIST Bridge Id 8000be8c722f7f00
Edgeport bpdu-filter disabled
Edgeport bpdu-guard disabled
Instance Interface VLAN
0 : 1, 4-100
1 : eth-0-1 2
2 : eth-0-1 3
Related Commands
7.44 show spanning-tree mst brief
Use this command to show the brief mstp information.
Command Syntax
show spanning-tree mst brief
show spanning-tree mst brief interface interface-id
show spanning-tree mst brief instance instance-id
instance-id instance number you want to display
interface-id The interface name you want to display
Command Mode
Privileged Exec modes
Default