CANOGA PERKINS CanogaOS Command Reference - Manual (Page 795)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 795 of 855
Related Commands
logging buffer
40.68 logging operate
To log the operations, use the logging operate command in global configuration mode.
Command Syntax
logging operate {enable | disable}
enable Enable logging operations.
disable Disable logging operations.
Command Mode
Global configuration
Default
Logging operations is disabled
Usage
The logging merge command merges all the same logs into one during a specified time range. During
this time, the switch buffered these same logs. You can use the timeout keyword to set the time range,
and use the fifo-size to set the buffer size.
Examples
The following is sample output from the logging merge command.
Switch(config)# logging merge enable
Related Commands
logging server
40.69 logging server
To enable the logging to the remote logging servers, use the logging server command in global
configuration mode.
Command Syntax
logging server {enable | disable}
enable Enable logging server.
disable Disable logging server.