CANOGA PERKINS CanogaOS Command Reference - Manual (Page 159)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 159 of 855
Command Syntax
show spanning-tree mst config
Command Mode
Privileged Exec modes
Default
Usage
Examples
The following is an output of this command displaying the mstp information. The down interface should
not be show.
Switch#show spanning-tree mst config
MSTP Configuration Information:
-----------------------------------------------------------------------
Format Id : 0
Name : My Name
Revision Level : 0
Digest : 0x69285BFFFF31FF13FFFFFF2D70FF23FFFFFFB4
Instances configured 2
-----------------------------------------------------------------------
Instance Vlans mapped
-----------------------------------------------------------------------
0 1
2 2
15 15
-----------------------------------------------------------------------
Related Commands
7.41 show spanning-tree mst detail
Use this command to show the detail mstp information.
Command Syntax
show spanning-tree mst detail [interface interface-id]
interface-id The interface name you want to display
Command Mode