CANOGA PERKINS CanogaOS Command Reference - Manual (Page 274)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 274 of 855
Command Mode
EXEC
Usage
The various forms of this command deliver information about different OSPF link state advertisements.
Examples
The following is sample output from the show ip ospf database command when no arguments or
keywords are used:
Switch# show ip ospf database
Router Link States (Area 3 [Stub])
Link ID ADV Router Age Seq# CkSum Link count
10.0.0.1 10.0.0.1 546 0x80000089 0x4567 1
Related Commands
15.38 show ip ospf interface
To display Open Shortest Path First (OSPF)-related interface information, use the show ip ospf
interface command in EXEC mode.
Command Syntax
show ip ospf interface [interface-name]
interface-name (Optional) Interface name. If the interface-name argument is included,
only information for the specified interface is included.
Command Mode
EXEC
Usage
Examples
The following is sample output of the show ip ospf interface command when eth-0-3 is specified:
Switch# show ip ospf interface eth-0-3
eth-0-3 is up, line protocol is up
Internet Address 3.3.3.1/24, Area 3 [Stub], MTU 1500
Process ID 0, Router ID 10.0.0.1, Network Type NBMA, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1