CANOGA PERKINS CanogaOS Command Reference - Manual (Page 808)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 808 of 855
40.85 clear mac address-table
Use the clear mac address-table privileged EXEC command on the switch to delete from the MAC
address table a specific dynamic address, all dynamic addresses on a particular interface, all dynamic
addresses on stack members, or all dynamic addresses on a particular VLAN.
Command Syntax
clear mac address-table {static | dynamic} [address mac-addr | interface interface-id | vlan vlan-id]
mac-addr Delete the specified MAC address.
interface-id Delete all MAC addresses on the specified physical port or link
aggregation port.
vlan-id Delete all MAC addresses for the specified VLAN. The range is 1 to 4094.
Command Mode
Privileged EXEC
Default
No default is defined.
Usage
Examples
This example shows how to remove a specific MAC address from the dynamic address table:
Switch# clear mac address-table dynamic address 0008.0070.0007
You can verify that the information was deleted by entering the show mac address-table privileged
EXEC command.
Related Commands
show mac address-table
40.86 show mac address-table ageing-time
Use the show mac address-table aging-time privileged EXEC command to display the aging time of
all address table instances on all VLANs.
Command Syntax
show mac address-table ageing-time
Command Mode
Privileged EXEC