CANOGA PERKINS CanogaOS Command Reference - Manual (Page 215)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 215 of 855
12.3 router-id (global)
To use a fixed router ID for all routing protocols, use the router-id command in global configuration
mode. To let switch select the router ID automatically, use the no form of this command.
Command Syntax
router-id ip-address
ip-address Router ID in IP address format.
Default
No router ID is defined.
Command Mode
Global configuration
Usage
You can configure an arbitrary value in the IP address format for each switch. However, each router ID
must be unique.
Examples
The following example specifies a fixed router-id:
Switch(config)# router-id 1.1.1.1
Related Commands
router-id (router)
12.4 clear ip route static
To clear all static IP routes, use the clear ip route static command in privileged EXEC configuration
mode.
Command Syntax
clear ip route [vrf name] static
vrf name VRF instance name.
Command Mode
Privileged EXEC
Usage
You can specify a VRF instance to clear the static routes in this VRF instance only.