CANOGA PERKINS CanogaOS Command Reference - Manual (Page 468)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 468 of 855
25.11 debug ldp fsm
Use this command to monitor the LDP finite state machine status.
Note:
On using a debug command, the router continues to generate an output until the
no parameter is used with the command. The debug output and system error
messages are written on the virtual terminal. Use the log file or log syslog
command in configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
debug ldp fsm
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp fsm command is used to monitor the LDP finite state
machine status:
Switch# debug ldp fsm
2002/06/18 11:40:01 LDP: FSM: State changed from NON_EXISTENT to INITIALIZED for
event LDP_EVENT_TCP_established
2002/06/18 11:40:01 LDP: FSM: State changed from INITIALIZED to OPENREC for event
LDP_EVENT_Recv_Init_msg
2002/06/18 11:40:01 LDP: FSM: State changed from OPENREC to OPERATIONAL for event
LDP_EVENT_Recv_KeepAlive_msg
2002/06/18 11:40:01 LDP: FSM: State changed from OPERATIONAL to OPERATIONAL for
event