CANOGA PERKINS CanogaOS Command Reference - Manual (Page 218)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 218 of 855
ip route
show ip route database
12.7 show ip route database
To display the Routing Information Base (RIB), use the show ip route database command in user
EXEC or privileged EXEC mode.
Command Syntax
show ip route database [vrf name] [protocl]
vrf name VRF instance name.
protocol (Optional) The name of a routing protocol, or the keyword connected, or
static. If you specify a routing protocol, use one of the following keywords:
bgp, ospf, and rip.
Command Mode
User EXEC
Privileged EXEC
Usage
You can display all active dynamic static routes with both the show ip route database and show ip
route database static commands after these active routes are added in the Routing Information Base
(RIB).
Examples
The following is sample output from the show ip route database command:
Switch# show ip route database
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
[*] - [AD/Metric]
> - selected route, * - FIB route, p - stale info
O *> 1.1.1.0/24 [110/2] via 10.10.1.1, eth-0-23, 00:48:58
O *> 2.2.2.0/24 [110/3] via 10.10.1.1, eth-0-23, 00:32:07
C *> 3.3.3.0/24 is directly connected, eth-0-1
C *> 10.10.1.0/24 is directly connected, eth-0-23
O *> 10.10.2.0/24 [110/2] via 10.10.1.1, eth-0-23, 00:32:07
O *> 10.10.3.0/24 [110/3] via 10.10.1.1, eth-0-23, 00:32:07
C *> 10.10.4.0/24 is directly connected, eth-0-20
K *> 192.168.0.0/24 is kernel directly connected, management interface