CANOGA PERKINS CanogaOS Command Reference - Manual (Page 343)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 343 of 855
Command Syntax
show ip bgp view WORD summary
show ip bgp view WORD ipv4 (unicast|multicast) summary
WORD the name of the instance to display data for.
unicast Specifies unicast prefixes.
multicast Specifies multicast prefixes.
Command Mode
Privileged Exec mode and Exec mode
Examples
The following example shows the summary data of instance named I2.
Switch# show ip bgp view I2 summary
BGP router identifier 10.10.10.50, local AS number 10
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.10.10.52 4 10 1 2 0 0 0 00:00:07 5
Total number of neighbors 1
Related Commands
show ip bgp neighbors
16.98 show ip bgp vpnv4
Use this command to display VPNv4 NLRI specific information.
Command Syntax
show ip bgp vpnv4 all TYPE
all Displays information about all VPNv4 NLRIs
TYPE = network|neighbors|summary|tags
neighbors Displays information about all VPNv4 NLRIs.
tags BGP Specifies tags for prefixes.
summary Displays summary of the BGP neighbor status.
network Network for which information will be displayed in the BGP routing table.
Command Mode
Privileged Exec mode and Exec mode
Examples