CANOGA PERKINS CanogaOS Command Reference - Manual (Page 285)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 285 of 855
Examples
Switch# configure terminal
Switch(config) router bgp 100
Switch(config-router) bgp confederation identifier 1
Related Commands
bgp confederation peer
16.11 bgp confederation peers
Use this command to configure the Autonomous Systems (AS) that belong to the confederation.
Use the no parameter with this command to remove an autonomous system from the confederation.
Command Syntax
(no) bgp confederation peers .ASN
ASN <1-65535> AS numbers of eBGP peers that are under same confederation but in a different
sub-AS
Command Mode
Router mode
Usage
A confederation allows an AS to be divided into several ASs. The AS is given a confederation identifier.
External routers view only the whole confederation as one AS. Each AS is fully meshed within itself and is
visible internally to the confederation. Use the bgp confederation peer command to define the list of
confederation peers.
Examples
Switch# configure terminal
Switch(config) router bgp 100
Switch(config-router) bgp confederation peers 1234 21345
Related Commands
bgp confederation identifier
16.12 bgp dampening
Use this command to set bgp dampening parameters.
Use the no parameter with this command to unset the bgp dampening parameters.