CANOGA PERKINS CanogaOS Command Reference - Manual (Page 210)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 210 of 855
administratively.
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# ethernet oam remote-loopback supported
Switch(config-if)# ethernet oam remote-loopback 2
11.12 ethernet oam remote-loopback start
Use this command to start an Ethernet OAM remote-loopback mechanism.
Command Syntax
ethernet oam remote-loopback start
Command Mode
Privileged Exec mode
Default
The default state of the remote loopback function is disabled.
Usage
This command is used to start a remote loopback mechanism.
Examples
Switch# configure terminal
Switch# ethernet oam remote-loopback start interface eth-0-1
11.13 ethernet oam remote-loopback stop
Use this command to stop an Ethernet OAM remote-loopback process.
Command Syntax
ethernet oam remote-loopback stop
Command Mode
Privileged Exec mode
Default
Use this command to stop an Ethernet OAM remote loopback mechanism.
Usage
Use this command to stop an Ethernet OAM remote loopback mechanism.