CANOGA PERKINS CanogaOS Command Reference - Manual (Page 519)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 519 of 855
26.2 no mpls ilm-entry
Use this command to remove one static ILM entry.
Command Syntax
no mpls ilm-entry INLABEL
Syntax Description
INLABEL Incoming label, the range is 16 to 1048575.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls ilm-entry command is used to remove one static ILM
entry:
Switch# configure terminal
Switch(config)# no mpls ilm-entry 100
Related Commands
mpls ilm-entry