CANOGA PERKINS CanogaOS Command Reference - Manual (Page 413)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 413 of 855
21.7 ip igmp proxy-service
Use this command to enable igmp mroute proxy service on the interface.
To disable it, use the no form of this command.
Command Syntax
ip igmp proxy-service
no ip igmp proxy-service
Command Mode
Interface configuration
Usage
This command is used with command ip igmp mroute-proxy and to set the upstream interface of the
igmp group.
Examples
This example shows how to enable igmp mroute proxy service on this interface.
Switch(config-if)# ip igmp proxy-service
This example shows how to disable igmp mroute proxy service.
Switch(config-if)# no ip igmp proxy-service
Related Commands
ip igmp mroute-proxy
21.8 ip igmp querier-timeout
Use this command to set the igmp previous querier timeout value.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp querier-timeout <60-300>
no ip igmp querier-timeout
<60-300>: the igmp previous querier timeout value
Command Mode
Interface configuration
Defaults
255 seconds
Usage