CANOGA PERKINS CanogaOS Command Reference - Manual (Page 238)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 238 of 855
C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP
Network Next Hop Metric From If Time
Rc 1.1.1.0/24 1 eth-0-1
Rc 2.2.2.0/24 1 eth-0-2
Rc 10.0.0.0/24 1 vlan10
Related Commands
show ip rip interface
14.19 show ip rip interface
To display summary information of Routing Information Protocol (RIP) for a specific interface, use the
show ip rip interface command in privileged EXEC mode.
Command Syntax
show ip rip interface [interface-id]
interface-id The interface name.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show ip rip interface command.
Switch# show ip rip interface eth-0-1
eth-0-1 is up, line protocol is up
Routing Protocol: RIP
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:
1.1.1.1/24
Related Commands
show ip rip database