CANOGA PERKINS CanogaOS Command Reference - Manual (Page 737)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 737 of 855
Command Syntax
show running-config [options]
access-list Displays ACL information.
as-path access-list Displays autonomous system path ACL.
class-map Displays class map information.
community-list Displays community list information.
full Displays the entire contents.
interface [IFNAME] Displays the interfaces information.
ip igmp snooping Displays IP IGMP snooping information.
ip mroute-rpf Displays multicast routes information.
ip multicast Displays multicast information.
ip pim sparse-mode Displays PIM sparse mode information.
ip route Displays IPv4 routes information.
ipv6 access-list Displays IPv6 ACL information.
ipv6 prefix-list Displays IPv6 prefix list information.
ipv6 route Displays IPv6 routes information.
key chain Displays key chain information.
policy-map Displays policy map information.
prefix-list Displays IPv4 prefix list information.
router bgp Displays BGP configuration information.
router ospf Displays OSPFv2 configuration information.
router rip Displays RIP configuration information.
router vrrp Displays VRRP configuration information.
router-id Displays router ID information.
switch dot1x Displays IEEE 802.1x information.
switch mstp Displays MSTP configuration information.
switch radius-server Displays radius server information.
switch rstp Displays RSTP configuration information.
switch vlan Displays VLAN database information.
vrf Displays IP vrf information.
Default
The show running-config command without any arguments or keywords displays the entire contents
of the running configuration file.
Command Mode
Privileged EXEC, global configuration, submode of global configuration
Usage
The show running-config interface command is useful when there are multiple interfaces and you
want to look at the configuration of a specific interface.
Examples