CANOGA PERKINS CanogaOS Command Reference - Manual (Page 783)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 783 of 855
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the debug stp command:
Switch# debug stp all
Related Commands
40.51 debug ospf
To display information on Open Shortest Path First (OSPF), use the debug ospf command in
privileged EXEC mode. To disable debugging output, use the no form of this
command.
Command Syntax
debug ospf [all | events | ifsm | lsa | nfsm | nsm | packet | route]
no debug ospf [all | events | ifsm | lsa | nfsm | nsm | packet | route]
all Enable all debugging.
events OSPF events information.
ifsm OSPF Interface State Machine.
lsa OSPF Link State Advertisement.
nfsm OSPF Neighbor State Machine.
nsm OSPF NSM information.
packet OSPF packets.
route OSPF route information.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the debug ospf command:
Switch# debug ospf all
Related Commands