CANOGA PERKINS CanogaOS Command Reference - Manual (Page 826)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 826 of 855
43 DNS Commands
43.1 ip host
To define static hostname-to-address mappings in the Domain Name System (DNS) hostname cache
for a DNS view, use the ip host command in global configuration mode. If the hostname cache does
not exist yet, it is automatically created. To remove a hostname-to-address mapping, use the no form
of this command.
Command Syntax
ip host hostname ip-address
no ip host hostname
hostname Name of the host. The first character can be either a letter or a number. If you
use a number, the types of operations you can perform (such as ping) are
limited.
ip-address Associated host IP address.
Default
No static hostname-to-address mapping is added to the DNS hostname cache for a DNS view.
Command Mode
Global configuration
Usage
Examples
The following example shows how to add a mapping entry to the global hostname cache and then
remove one of those entries from the global hostname cache:
Switch(config)# ip host www.example1.com 192.0.2.141
Related Commands
show ip host
43.2 dns domain
To specify the default domain for a Domain Name System (DNS) view to use to complete unqualified
hostnames (names without a dotted-decimal domain name), use the dns domain command in global
configuration mode. To remove the specification of the default domain name for a DNS view, use the
no form of this command.