CANOGA PERKINS CanogaOS Command Reference - Manual (Page 643)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 643 of 855
32.25 queue threshold
Use this command to configure the interface queue threshold.
To remove this setting, use the no form of this command.
Command Syntax
queue <0-7> threshold <0-62> <1-63> <2-64>
no queue <0-7> threshold
<0-7>: queue id
<0-62>: Drop precedence 0 threshold range
<1-63>: Drop precedence 1 threshold range, should greater than drop precedence 0
threshold
<2-64>: Drop precedence 2 threshold range, should greater than drop precedence 1
threshold
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure interface queue threshold to 16 32 48.
Switch(config-if)# queue 1 threshold 16 32 48
This example shows how to remove this setting.
Switch(config-if)# no queue 1 threshold
Related Commands
queue random-detect max-threshold
queue random-detect min-threshold
queue random-detect drop-probability
32.26 queue-bandwidth
Use this command to the queue bandwidth percent range.
To return it to default value, use the no form of this command.
Command Syntax
queue-bandwidth qb0 qb1 qb2 qb3 ab4 qb5 qb6 qb7
no queue-bandwidth
qb0: queue 0 bandwidth percent range
qb1: queue 1 bandwidth percent range