CANOGA PERKINS CanogaOS Command Reference - Manual (Page 706)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 706 of 855
Usage
You must first globally enable DHCP snooping before enabling DHCP snooping on a VLAN.
Examples
This example shows how to enable DHCP snooping on VLAN 10:
Switch(config)# dhcp snooping vlan 10
Related Commands
show dhcp snooping config
show dhcp snooping binding
36.10 show dhcp snooping binding
Use the show dhcp snooping binding privileged EXEC command to display the DHCP snooping
binding database and configuration information for all interfaces on a switch.
Command Syntax
show dhcp snooping binding [summary]
summary Display summary information of DHCP snooping bindings.
Command Mode
Privileged EXEC
Usage
If DHCP snooping is enabled and an interface changes to the down state, the switch does not delete
the statically configured bindings.
Examples
The following is sample output from the show dhcp snooping binding command:
Switch# show dhcp snooping binding
DHCP snooping binding table:
VLAN MAC Address Lease IP Address Interface
============================================================
10 0000.0111.00ef 12338 10.10.1.1 eth-0-10
Related Commands
dhcp snooping binding
36.11 show dhcp snooping config
Use the show dhcp snooping privileged EXEC command to display the DHCP snooping