CANOGA PERKINS CanogaOS Command Reference - Manual (Page 362)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 362 of 855
18.10.1.4 Defaults
none
18.10.1.5 Examples
In the following example, the track rtr reachability command is used to create an track object:
Switch(config)#track 1 rtr 1 reachability
Switch(config-track)#
18.10.1.6 Related Commands
Show track
18.11 TRACK RTR STATE
Create a track object and track the state of an ip sla entry, use the track rtr state to command in
global configuration mode. To remove a track, use the no form of this command.
When the state of ip sla entry is OK , track object state is up; otherwise track object state is
down.
18.11.1.1 Command Syntax
track objected rtr entrynumber state
no track objectid
18.11.1.2 Syntax Description
objectid Object identity is used to identify track object, its range is
from 1 to 500;
entrynumber Entry number is used to identify ip sla monitor entry, its
range is from 1 to 500;
18.11.1.3 Command Mode
Global configuration
18.11.1.4 Defaults
none
18.11.1.5 Examples
In the following example, the track rtr state command is used to create an track object:
Switch(config)#track 1 rtr 1 state
Switch(config-track)#
18.11.1.6 Related Commands
Show track