CANOGA PERKINS CanogaOS Command Reference - Manual (Page 425)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 425 of 855
125 seconds
Usage
None
Examples
This example shows how to set the igmp snooping query interval to 64s.
Switch(config)# ip igmp snooping query-interval 64
This example shows how to return the query-interval to default value.
Switch(config)# no ip igmp snooping query interval
Related Commands
ip igmp snooping
22.6 ip igmp snooping query-max-response-time
Use this command to set the igmp snooping query max response time.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp snooping query-max-response-time <1-25>
no ip igmp snooping query-max-response-time
<1-25>: the query max response time (seconds)
Defaults
10 seconds
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the igmp snooping query max response time to 15s.
Switch(config)# ip igmp snooping query-max-response-time 15
This example shows how to return the query max response time to default value.
Switch(config)# no ip igmp snooping query-max-response-time
Related Commands
ip igmp snooping