CANOGA PERKINS CanogaOS Command Reference - Manual (Page 634)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 634 of 855
all: All ingress map table
cos-priority-color: COS map to priority and color
dscp-priority-color: DSCP map to priority and color
exp-priority-color: Exp map to priority and color
ip-prec-priority-color: IP precedence map to priority and color
default: default configuration
running: running configuration
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the ingress information of qos map-table.
Switch#show qos map-table ingress all defult
COS map to PRIORITY & COLOR:
-------------------------------------------
COS : 0 1 2 3 4 5 6 7
priority: 0 8 16 24 32 40 48 56
color : green green green green green green green green
DSCP map to PRIORITY & COLOR:
-------------------------------------------
DSCP : 0 1 2 3 4 5 6 7
priority: 0 1 2 3 4 5 6 7
color : green green green green green green green green
......
Related Commands
show qos map-table all
show qos map-table egress
32.12 cos
Use this command to configure default cos value on port.
To cancel this setting, use the no form of this command.
Command Syntax
cos <0-7>
no cos
<0-7>: cos value
Command Mode