CANOGA PERKINS CanogaOS Command Reference - Manual (Page 268)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 268 of 855
‹ Type 1 external route
‹ Type 2 external route
If a metric-type is not specified, the switch adopts a Type 2 external
route.
Default
Route redistribution is disabled.
metric metric-value: 20
metric-type type-value: Type 2 external route
Command Mode
Router configuration
Usage
The metric value specified in the redistribute command supersedes the metric value specified using
the
Default -metric command.
Examples
The following example redistribute the static routes into OSPF with metric 10:
router ospf 119
network 10.108.0.0/16
redistribute static metric 10
!
Related Commands
default-metric
15.32 router-id (OSPF)
To use a fixed router ID, use the router-id command in router configuration mode. To force Open
Shortest Path First (OSPF) to use the previous OSPF router ID behavior, use the no form of this
command.
Command Syntax
router-id ip-address
no router-id
ip-address Router ID in IP address format.
Default
No OSPF routing process is defined.
Command Mode