CANOGA PERKINS CanogaOS Command Reference - Manual (Page 448)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 448 of 855
access-list: Group ranges for this C-RP
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the interface eth-0-1 to be the candidate rp.
Switch(config)#ip pim rp-candidate eth-0-1
This example shows how to cancel the configured candidate rp.
Switch(config)#no ip pim rp-candidate eth-0-1
Related Commands
ip pim rp-address
24.17 ip pim rp-register-kat
Use this command to set the keepalive timer (KAT) for (S,G) at RP from PIM registers.
To return this timer to default value, use the no form of this command.
Command Syntax
ip pim rp-register-kat <time>
time: <1-65535> KAT time in seconds
Command Mode
Global configuration
Usage
The register message send from dr will add an entry on rp. This entry will be aged when the keepalive
timer expired which can be configured by this command.
Examples
This example shows how to set the keepalive timer to 100s at RP from PIM registers.
Switch(config)#ip pim rp-register-kat 100
This example shows how to return this timer to default value.
Switch(config)#no ip pim rp-register-kat
Related Commands
ip pim rp-address
ip pim rp-candidate